silencers

英 [ˈsaɪlənsəz]

美 [ˈsaɪlənsərz]

n.  (发动机的)消音器; (枪支的)消音器
silencer的复数

柯林斯词典

• N-COUNT (枪支的)消音器
  Asilenceris a device that is fitted onto a gun to make it very quiet when it is fired.
  1. ...a pistol that was equipped with a silencer.
     装了消音器的手枪
• (汽车排气管上的)消音器
  Asilenceris a device on a car exhaust that makes it quieter.

in AM, use 美国英语用 muffler

双语例句

• Three-dimensional FEM is developed to predict and analyze the acoustic attenuation characteristics of perforated tube silencers.
  三维有限元法被发展用于预测和分析穿孔管消声器的声学性能。
• On this basis structural optimization of two silencers are put up, and specific design scheme and structural dimensions are determined. Process water silencer and put up experimental research.
  在此基础上进行了两种消声器的结构优化设计，并确定了具体的设计方案和结构尺寸，设计加工了可变频消声器的原理样机，进行了实验研究。
• The perforated elements are commonly used in silencers to improve the acoustic attenuation and flow characteristics. To predict the acoustic attenuation performance of silencers, the acoustic characteristics of perforated elements needs to be determined first.
  由于能改善消声效果和气体流动特性，穿孔元件在消声器中广泛应用，为预测消声器的声学性能，首先需要确定穿孔元件的声学特性。
• The predicted transmission loss of perforated tube silencers using the finite element method and experimental results are compared and showed good agreement.
  使用有限元法计算穿孔管消声器的传递损失，并与实验测量结果进行了比较，二者吻合良好。
• Comparisons of transmission loss predictions with experimental results for straight through perforated tube dissipative silencer illustrated that FEM can predict acoustic characteristics of perforated tube silencers accurately.
  直通穿孔管阻性消声器传递损失的有限元预测结果与实验测量结果吻合很好，表明了三维有限元法预测穿孔管阻性消声器声学性能的适用性和精度。
• The boundary element method is then used to investigate the effects of bulk density of sound-absorbing material ( or flow-resistivity) and geometrical parameters on acoustic attenuation performance of perforated tube dissipative silencers.
  边界元法进而被用于研究吸声材料的填充密度（流阻率）和几何参数对穿孔管阻性消声器消声性能的影响。
• Finite Element Calculation and Analysis of Acoustic Attenuation Performance of Perforated Tube Silencers
  穿孔管消声器消声性能的有限元计算及分析
• Finally, the transmission loss results of straight-through perforated tube silencers with partially-perforated tube and divided tube are calculated and analyzed. Some conclusions are drawn according to these results, which supply guidance for silencer designs.
  最后计算并分析了中心管部分穿孔和带有分隔管的直通穿孔管消声器的传递损失，得出一些结论，为消声器设计提供指导。
• Study on Variably Tuned Silencers for Water Pipeline System
  水管路系统可调频消声器研究
• The sound source and microphones are arranged reasonably, so that the transmission loss of silencers with high gas flow velocity and the flow generated noise inside the silencer can be measured on the test-bed.
  设计并搭建了消声器声学性能测量试验台，合理布置声源及传声器，使该台架可用于高流速情况下消声器传递损失以及消声器内流噪声的测量。