slivers

英 [ˈslɪvəz]

美 [ˈslɪvərz]

n.  (切下或碎裂的)小块，薄片
sliver的第三人称单数和复数

柯林斯词典

• N-COUNT 小片;一点儿
  Asliver ofsomething is a small thin piece or amount of it.
  1. Not a sliver of glass remains where the windows were...
     窗户上连一点儿玻璃碎片都没有留下。
  2. There was only one sliver of light in the darkness.
     黑暗中只有一点零星的光亮。

双语例句

• The slivers of nail that I had cut away I would gather up out of my lap and throw on the fire.
  然后我会将掉在我腿上的指甲条收拾干净，扔进火炉里。
• To test this idea, they used slivers of wood from yellow pines.
  为了测试这种想法，他们从黄松树干上取了些木条子。
• The quality of the drafted slivers performance is the primary indicator which is used to evaluate the effects of the drafting. Therefore, the study on drafting is aimed to obtain better yarn qualities.
  牵伸后的纱条质量是评定牵伸效果的主要指标，因此对于牵伸的研究是以获得好的成纱质量为目的的。
• The test shows that double press bar top pin in back zone draft set has bigger control of slivers in back zone, and can enhance back zone draft ability of spinning frame, increase draft multiple, and enhance fine count yarn quality.
  结果表明：后区附双根压力棒新型上销牵伸装置对后牵伸区须条的控制增强，可以提高细纱机的后区牵伸能力，增大总牵伸倍数，有利于细号纱纺纱质量的提高。
• Solving the deterioration problem of cashmere slivers after sectional drafting.
  解决了分段牵伸后羊绒条干恶化问题。
• The motion of floating fibers during drafting has been considerably studied with the aim to control the floating fibers effectively, and to improve the slivers regularity.
  有效地控制须条在牵伸区内浮游纤维的运动，使其变速点分布更为合理，尽可能降低条干不匀率，是牵伸理论研究的基本问题。
• WHISKERS: Slivers of steel left at top rim, or bottom of cage pocket, on cage; a undesirable defect.
  金属须：留在保持架窗口上面或者边缘的金属丝，一种不合理的缺陷。
• A method to analyze the frequency spectrum of yarns and slivers unevenness signal
  对纱条不匀信号频谱分析的方法
• These slivers can be further reduced in diameter and then twisted and plied in yarns of various sizes using textile machinery and processes similar to those employed for other staple materials.
  这些纱条的直径可以进一步减小，然后经过加捻、合股，采用与其它纤维材料加工类似的工艺，制成不同规格的纱线。
• Conversion of caster from the curved to the vertical bending one is the most effective measures to eliminate the pipe listers and slivers for cold rolled Ti SULCAK ( Ti-beating extra low carbon steel sheet).
  为了消除TiSULCAK（含Ti超低碳铝脱氧镇静钢）钢冷轧薄板上的铅笔型气泡，将铸机从弧型改为立弯型是最有效的措施；