tolerances
英 [ˈtɒlərənsɪz]
美 [ˈtɑlərənsɪz]
n. 忍受; 容忍; 宽容; 宽恕; 忍耐力; 忍受性; 耐力; 耐量; 公差; 容限
tolerance的复数
柯林斯词典
- N-UNCOUNT 宽容;容忍
Toleranceis the quality of allowing other people to say and do as they like, even if you do not agree or approve of it.- ...his tolerance and understanding of diverse human nature.
他对人性多面性的宽容与理解 - …the acceptance and tolerance of other ways.
对其他方法的接受与宽容
- ...his tolerance and understanding of diverse human nature.
- N-UNCOUNT 忍耐(力);忍受(力)
Toleranceis the ability to bear something painful or unpleasant.- There is lowered pain tolerance, lowered resistance to infection.
对疼痛的忍耐力降低了，对感染的抵抗力也减弱了。 - ...a low tolerance of errors.
对错误的低容忍度
- There is lowered pain tolerance, lowered resistance to infection.
- N-VAR 耐受性
If someone or something has atolerance toa substance, they are exposed to it so often that it does not have very much effect on them.- As with any drug taken in excess, your body can build up a tolerance to it.
和过量服用任何其他药物一样，身体会对它产生耐药性。
- As with any drug taken in excess, your body can build up a tolerance to it.
双语例句
- Reduced contact force due to temperature effect and control module tolerances.
由于温度效应和控制单元公差导致的接触力降低。 - Welding techniques shall be selected to ensure that specified tolerances for straightness and out-of-roundness are not exceeded.
选用焊接技巧应保证不超出指定的直线度和圆度允差。 - In mass production, where mating parts must be interchangeable, unilateral tolerances are customary.
大规模生产中配合零件必须能互换，单向公差是经常遇到的。 - Selected combinations of RC components guarantee wave shape parameters to be within tolerances.
所选RC组件的结合确保了波形参数保持在容差范围内。 - New extruders can achieve higher throughputs, narrow tolerances and better melt homogeneity and therefore improved product quality.
新式挤出机能实现更高的加工能力、范围窄的公差和更好的熔体均匀度，所以提高了产品质量。 - Take critical site dimensions to ensure tolerances and clearance to other building site work.
考虑关键现场尺寸，保证与其他现场工作建筑的裕度和净空。 - The measurements of the stand automatically include tolerances.
胸架的尺寸自然包括了公差。 - For acceptance controls, the dimensions and tolerances specified in these drawings shall be taken into consideration.
对于验收检验，应考虑这些制图中固定的尺寸和容差。 - Not only must the centers decrease, but the tolerances to produce quality bonds must also decrease.
不仅中心间距减少，而且产生优质连接的容限也必须减少。 - Draft allowances can be incorporated into dimensional tolerances or geometric tolerances only upon consultation with the foundry.
拔模斜度余量只有经与铸造厂商定后才能合并到尺寸公差或形位公差中。